Pinterest Offical Page : Emekce.com
Facebook Group: Amigurumi Free Patterns
Facebook Offical Page: Emekce.com
Amigurumi Rainbow Girl doll free pattern is waiting for you in this article. We continue to share the latest amigurumi recipes.
Mr = Magic ring
sc = single crochet
inc = Increase
dec = decrease
sl-st = slip-stitch
dc =double crochet
1.6sc into magic ring
2. (1sc, inc) * 3 = 9sc
3. (2sc, inc) * 3 = 12sc
4. (3sc, inc) * 3 = 15sc
6.14sc, 3DC with a common vertex in one loop
8. dec, 5sc, dec, 4sc, dec = 12sc
11.5sc, inc 6sc = 13sc
Tightly fill the brush, then continue to fill the handle every 5 rows, but not
12-26. 13sc (total 15 rows)
We knit an additional 6sc to go to the back of the handle.
We knit the second handle according to the same pattern.
SHOE AND FOOT:
Knit in a spiral with a green thread.
1. We recruit a chain of 9ch. In the second loop from the hook we knit 2sc, then
along the Magic ring chain, we knit 6sc each air loop, last
we knit an air loop 4sc. On the back of the chain we knit
6sc and in the last loop we knit 2 sc. We get 20sc.
We put a marker, and now this place is the conditional center of the leg and a landmark for accounting
2. 2inc 6sc, 4inc 6sc, 2inc = 28sc
3. (1sc, inc) * 3, 2sc, (1sc, inc) * 6, 2sc, (1sc, inc) * 3 = 40sc
In this place, I additionally knit 1sc, since the beginning of the row has shifted. AND
I do it every 3-4 rows. I will not write further about displacement loops, since in
depending on the density of knitting, we can have them on different rows.
4. 40sc knit for the back half-loop
9.3sc, dec, 7sc, (dec, 2sc) * 2, (2sc, dec) * 2, 7sc, dec, 3sc = 34sc
11.8sc, (1sc, dec) * 6, 8sc = 28sc
Change the thread to white.
12.28sc knit for the back half-loop
13.5sc, (1sc, dec) * 6, 5sc = 22sc
15.9sc, 2dec, 9sc = 20sc
We stuff the shoe tightly. Then every 5 rows we evenly stuff the leg.
16-23. 20sc (total 8 rows)
Change the thread to beige.
24. Knit for the back half loop 20sc
25-37. 20sc (13 rows total)
Cut the thread, hide it. We knit the second leg in the same way.
DESIGN OF SHOES AND LEGS:
In the 4th row, for the front half loops we make the soles of the soles of the connecting
columns of green thread. The direction of the strapping, see the photo. it
important. Fasten, cut, hide the thread.
We pass to the 12th row. We make symmetrical markings where they will begin
thongs. From the markings on the left, attach the green thread to the front half loops
we do a crochet in a clockwise column. Total 27 sc. Further
we collect 20 air loops. In the second from the hook air loop
we knit the connecting column and then knit the connecting chains
columns to the end. In 28 half loops we knit 1sc, make the connecting
loop, fasten the thread, cut, hide. Fasten the strap and shoe
In the 24th row we attach a white thread. We make socks on the socks for
front half loops: we collect a chain of 3 air loops, 1sc in the next
loop, again we type 3ch, 1 sc into the next loop …. And so on until the end. A thread
fasten, cut, hide.
BODY. PART 1:
We return to the 37th row of the left leg.
We attach the white thread.
It is necessary to knit 2 rows and cut the thread, leaving a small tail.
We pass to the right leg.
We attach the white thread.
We knit 2 rows and now we need to connect both legs.
To connect the legs, on the left leg we dissolve 4-5 loops, and on the right –
we additionally knit 4-5 loops.
We put the legs exactly so that the socks look in turn.
The last loops on both legs should dock.
If this does not happen, then adjust (we knit or dissolve 1-2 loops).
Next, connect the legs using 4ch.
We continue to knit on the left leg.
We fold our legs exactly in half and tie it to the left side.
We put a marker – now here is the beginning of the row.
1. We knit sc on the front of the left leg,
4sc chain of air loops,
20sc on the right leg,
4sc chain of air loops,
remaining sc on the back of the left leg = 48sc
2.inc 22sc, inc (4sc, inc) * 4, 4sc = 54sc
3-7. 54sc (total 5 rows)
8. 6sc, dec, 10sc, dec, 14sc, dec, 8sc, dec, 8sc = 50sc
10. dec, 22sc, dec, 24sc = 48sc
12.7sc, dec, 6sc, dec, 14sc, dec, 6sc, dec, 7sc = 44sc
15. dec, 18sc, dec, 22sc = 42sc
17.42sc for the back half-loop
18. dec, 19sc, dec, 19sc = 40sc
19-23. 40sc (5 rows total)
24. (18sc, dec) * 2 = 38sc
We will knit for the front half loops 17 rows with single crochet,
using lift loops
1. RED: 3ch lift, then into the Magic ring, each half loop we increase from
In the last loop from which 3ch was knitted, we knit 1DC = 84DC
2. RED: increase into Magic ring each loop = 168DC
3. ORANGE: 4ch lift, 1DC we knit in the 3rd loop of the previous
rows, 1ch, 1DC we knit in the 5th loop of the previous row, 1ch …
and so on to the end.
End the row by connecting the last air loop and the third air loop
loop on lifting hinges.
4. ORANGE: 168DC
5. YELLOW: as well as the 3rd row
6. YELLOW: 168DC
7. GREEN: same as row 3
8. GREEN: 168DC
9. GOLDECOY: as well as the 3rd row
10. VIDEO: 168DC
11. LILAC: as well as row 3
12. LILAC: 2sc, pico, 2sc, pico, 2sc, pico and so on until the end of the row
Cut the threads, hide.
I do not knit rows of BLUE, as the skirt will be too long and not
BODY. PART 2:
Fold the body in half. Exactly in the middle, select 15sc in front, set
markers, leave 4sc on each hand, put markers, 15sc will remain behind.
We take the thread that knitted the body, about 20 cm long. Connect with 4
single crochet, handles and body so that the fingers look in turn.
Look carefully, is it even?
At the left handle on the back we attach a beige thread. Put the marker here
now the beginning of the series. We will knit in a spiral, without displacement loops, including in
a number of remaining loops of handles and body. Where the white thread is knitted for the back
half loops. It turns out like this:
1. 9sc on the left hand, 1sc (in the loop that was extreme when stitching
arms and bodies), 15sc across the chest for the back half-loop, 1sc (in the loop that
was extreme when stitching the arm and body), 9sc on the right hand, 1sc (in that
loop, which was extreme when stitching the arm and body), 15sc on the back behind
back half-loop, 1sc (in the loop that was extreme when stitching the hand
and bodies) = 52sc
Total: 11sc for each handle and 15sc for the back and chest
4. 4sc, dec, 3sc, dec, 13sc, dec, 4sc, dec, 3sc, dec, 13sc, dec = 46SC
3. 3sc, dec, 3sc, dec, 11sc, dec, 3sc, dec, 3sc, dec, 11sc, dec = 40SC
6.2sc, 2dec, 2sc, dec, 8sc, dec, 2sc, 2dec, 2sc, dec, 8sc, dec = 32sc
Tightly stuff shoulders, draw a line of shoulders, but not stuffing
the pen itself. We stuff the body.
7. (2sc, dec) * 8sc = 24sc
8. (1sc, dec) * 8sc = 18sc
Stuff shoulders and chest again. Very tight.
Stuff your neck tightly.
Do not cut the thread!
We return to the 25th row of the body (part 1), we will knit for the front half-loops, not according
spiral using a lifting loop.
On the back we find the central loop (it is the 8th from the right hand), attach the thread
1. We knit 2 lifting air loops, 7sc, 13 ch, bend around the left hand, 15sc in
front half loops of the chest, 13 ch, bend around the right hand, 7sc.
2.2ch lift, 55sc = 56sc
3.2ch lift, 6sc, dec, 4sc, dec, 5sc, dec, 13sc, dec, 5sc, dec, 4sc, dec, 6sc
Fasten, cut, hide the thread.
Sew a patterned button or applique on the front of the blouse (on
If you want to tighten the neck, then you can take cotton buds, pieces 3-5,
rewind with electrical tape and insert into the neck, on the sides sealing with filler.
Keep knitting from the neck
1.18inc = 36sc
2. (5sc, inc) * 6 = 42sc
3. 3sc, inc (6sc, inc) * 5, 3sc = 48sc
4. (7sc, inc) * 6 = 54sc
5.4sc, inc (8sc, inc) * 5, 4sc = 60sc
6. (9sc, inc) * 6 = 66sc
In addition, tie so many sc so that the beginning of the row is exactly to the left side,
7.6sc, inc 5sc, inc 7sc, inc 5sc, inc 39sc = 70sc
8-14. 70sc (7 rows total)
15. (dec, 5sc) * 5, dec, 33sc = 64sc
16-19. 64sc (4 rows total)
20. (14sc, dec) * 4 = 60sc
21. (8sc, dec) * 6 = 54sc
22.3sc, dec, (7sc, dec) * 5, 4sc = 48sc
We begin to stuff our heads very tightly.
23. (6sc, dec) * 6 = 42sc
24. (5sc, dec) * 6 = 36sc
25. (4sc, dec) * 6 = 30sc
26. (3sc, dec) * 6 = 24sc
Once again, we fill with the filler, until it stops.
27. (2sc, dec) * 6 = 18sc
28. ((1sc, dec) * 6 = 12sc
Tighten the hole, fasten the thread, hide.
FACE AND HAIR:
We put the markings: white needles – eyes, pink – nose, yellow – the edge of the hair.
The eyes are located between 13 and 14 nearby, at a distance of 5-6sc.
Sew on eyes.
We embroider with black thread eyelashes and eyebrows.
We start hair from the 20th row.
We need a lot of threads of the same length, twice as long as necessary.
I take cardboard, cut off the right size, try on from the bottom edge of the hair line.
I wind the thread on cardboard and cut it.
Then with the help of a hook I put it under sc, I knit one knot, folding
exactly in half.
I draw a line of facial hair for each sc. Everyone else under 2sc.
If you don’t want the hairstyle to be too lush or your head bobbing,
make gaps between the hairs (fixed under 2sc, skipped 1-2sc).