Free Crochet Pattern: Amigurumi Cute Owl – Craft Your Own Adorable Feathered Friend

Unleash your creativity with our free crochet pattern for an adorable amigurumi owl! Whether you’re a crochet novice or a seasoned pro, this pattern is perfect for bringing a touch of whimsy to your crafting projects. Stitch by stitch, you’ll create a charming feathered friend that’s as cute as it is cuddly. Made with soft yarn and featuring intricate details, this amigurumi owl is sure to delight both children and adults alike. Follow our step-by-step instructions to crochet your own little owl companion and add a dash of sweetness to your home decor or gift-giving.

Abbreviations:

SC – single crochet

İNC – increase

DEC – decrease

CH – chain

LIST OF NECESSARY MATERIALS AND TOOLS:

1) for the body, Nako Paris yarn (60% polyamide, 40%

premium acrylic, 245m / 100g) – 1 pc. any color;

2) for scarf and cap yarn Bambino Kamteks (35%

merino wool, 65% acrylic, 150m / 50g) – half

hank of two contrasting colors;

3) for the feet yarn Bambino Kamteks (35% merino wool,

65% acrylic, 150m / 50g) brown or black –

Little;

4) aluminum or copper wire with a diameter of 2 mm for

legs – 120 cm;

5) insulating tape or tissue adhesive tape – a little;

6) doll eyes with a diameter of 25 mm are blue or green,

or hazel – 1 pair;

7) felt white for the eyes – a little;

8) false eyelashes or doll;

9) glue for attaching eyes, eyelashes and beak;

10) polymer clay for beak – a little;

11) scissors;

12) a needle with a big eye;

13) hook No. 3;

14) filler (holofiber, or synthetic winterizer, or

sintepuh) – about 50 – 70 g;

15) brown dry pastel for tinting (optional);

16) decoration elements – buttons, pompoms, rhinestones, etc.

(optional).

Note! You can take any yarn for clothes on

Your taste and color.

PATTERN

STEP 1. Taurus.

We knit from Nako Paris yarn, hook No. 3.

1 row: we collect a chain of 20 CH + 1 CH, with the second from

we knit a hook of a loop on a chain 18 SC, in the last

loop 3 SC, 18 SC on the other side of the chain of CH, 2

SC last loop (42)

2 row: İNC, 18 SC, 3 İNC, 18 SC, 2 İNC (48)

3 row: İNC, SC, 18 SC, (İNC, SC) * 3, 18 SC,

(İNC, SC) * 2 (54)

4 – 23 (20 rows): 54 SC (54)

24 row: (7 SC, DEC) * 6 (48)

25 row: 48 SC (48)

26 row: (6 SC, DEC) * 6 (42)

27 row: 42 SC (42)

28 row: 3 SC, İNC, (6 SC, İNC) * 5, 3 SC (48)

29 row: (7 SC, İNC) * 6 (54)

30 row: 4 SC, İNC, (8 SC, İNC) * 5, 4 SC (60)

31 row: (9 SC, İNC) * 6 (66)

32 row: 5 SC, İNC, (10 SC, İNC) * 5, 5 SC (72)

33 row: (11 SC, İNC) * 6 (78)

34 – 53 (20 rows): 78 SC (78)

We do not cut the thread yet.

We turn the canvas inside out, because it’s more fluffy there

(optional), and set aside for a while.

STEP 2. LEGS.

We take a wire with a diameter of 2 mm, a length of about 60

cm and do the leg preparation according to the scheme (see photo 1 – 2

below).

Then spread the finger with glue and tightly

wrap with brown (or black) threads.

Thus we wrap all 4 fingers and the leg itself

to a height of about 6 – 7 cm, the ends of the thread are fixed with glue.

We do the second leg in the same way.

Insert the finished legs into the previously connected body in

the first row of knitting from the bottom, departing from the edges of 2 cm.

We adjust the legs to the desired height, it can be

from 3 to 6 cm, and fix inside the body with electrical tape (or

tissue adhesive), wrapping it with a thick layer

per leg (see photo 4 – 5 below).

We twist the wire from the legs together,

isolate. After that, we stuff the body with the filler.

Connect the upper edges of the body with SL-ST (see photo 7 below),

fasten the thread, cut it off.

STEP 3. WINGS AND TAIL.

WINGS (2 pcs.)

We knit from the same threads as the body, turning

in rows.

1 row: we dial 2 CH, in the second loop we knit 2 SC, CH,

turn (2)

2 row: 2 İNC, CH, turn (4)

3 row: İNC, 2 SC, İNC, CH, turn (6)

4 row: İNC, 4 SC, İNC, CH, turn (8)

5 row: İNC, 6 SC, İNC, CH, turn (10)

6 row: İNC, 8 SC, İNC, CH, turn (12)

7 – 11 (5 rows): 12 SC, CH, turn (12)

12 row: DEC, 8 SC, DEC, CH, turn (10)

13 row: DEC, 6 SC, DEC, CH, turn (8)

14 row: DEC, 4 SC, DEC (6)

We fix the thread, leave the end for sewing

wing, cut off.

We knit the second wing in the same way.

Sew the wings on the sides of the body, backing away

approximately 3 rows of SC from the neck (see photo 3 below).

TAIL.

We knit from the same threads as the body, turning

in rows.

1 row: we collect a chain of 11 CH, from the second from the hook

we knit loops on a chain 10 SC, CH, rotation (10)

2 – 4 (3 rows): 10 SC, CH, turn (10)

5 row: DEC, 6 SC, DEC, CH, turn (8)

6 – 10 (5 rows): 8 SC, CH, turn (8)

In the 10th row we do not cut the thread, continue to bind

tail:

first we knit SC along the side of the tail, then 2

SC to bottom corner, 5 DC to next loop down

tail, SC skip, SC, SC skip, 5 DC in

next loop, SC skip, SC, 5 DC in

the next loop, 2 SC to the bottom corner of the tail, then

again we knit SC on the side of the tail to the top

angle.

We fix the thread, leave the end for sewing

tail, cut.

Sew the tail in the center back (see photo 4 above).

STEP 4. DECORATION.

EYES.

1) Cut out from white felt 2 blanks for the eyes in size

(W * H) 3 * 4 cm. Make scissors in the blanks in the center

small cuts (see photo below).

2) Insert the blue (or any other) eyes into the incisions –

pupils with a diameter of 25 mm.

3) Glue the pupils to the felt details of the eyes with super-glue.

4) On top of the felt part of the eyes, glue the overhead

eyelashes.

5) Ready eyes try on an owl on the head, placing

them in the 17th row from the top row of knitting. Rasl-stoyanie

between the eyes you can do whatever you like

like it.

6) Glue the eyes with transparent super-glue to the head.

7) Make the tint around the eyes brown dry

pastel (optional).

BEAK.

Option 1. Made of polymer clay.

We sculpt the beak from polymer clay yellow, orange

or brown. I got a beak in the form

equilateral triangle with sides approximately 1

see. You can make a beak of any size as desired.

The reverse side of a thick needle is done on top of

beak two holes that mimic the nostrils.

We bake the finished beak according to the instructions, give

cool and glue with super-glue to the head between the eyes.

Option 2. Knitted beak.

Knit yellow, orange or brown

strings (optional). I took yarn with a density

150m / 50g, hook No. 2.

1 row: dial 2 CH, in the second from the hook we knit a loop

2 SC, CH, turn (2)

2 row: 2 İNC, CH, turn (4)

3 row: İNC, 2 SC, İNC (6)

We don’t cut the thread, we tie the beak along the SL-ST contour,

then fix the thread and cut it.

Sew the knitted beak with black threads

small stitches in the places where they are located

the nostrils.

After the owl is completely ready, comb

it with Velcro or scallop with rare cloves.

STEP 5. CLOTHES.

CAP.

First, we knit the bottom elastic for the cap in white

strings (see photo 1 – 2 above).

1 row: dial 4 CH + 1 CH, from the second from the loop hook

we knit 4 SC, CH, turn (4)

2 – 54 (53 rows): behind the RFP 4 SC, CH, turn (4)

Do not cut the thread, connect the edges of the elastic: 4 SL-ST for both

half loops.

We continue knitting, we tie a rubber band on top of SC.

1 row: 54 SC (54) and then we knit in a spiral.

2 – 3 row: 54 SC (54)

Change the color of the thread to turquoise (optional).

Note! If you want to knit striped

cap, like me, then change the thread color through

every 4 rows of white and 3 rows of turquoise.

4 row: (7 SC, DEC) * 6 (48)

5 – 7 (3 rows): 48 SC (48)

8 row: (6 SC, DEC) * 6 (42)

9 – 11 (3 rows): 42 SC (42)

12 row: (5 SC, DEC) * 6 (36)

13 – 15 (3 rows): 36 SC (36)

16 row: (4 SC, DEC) * 6 (30)

17 – 20 (4 rows): 30 SC (30)

21 row: (3 SC, DEC) * 6 (24)

22 – 25 (4 rows): 24 SC (24)

26 row: (2 SC, DEC) * 6 (18)

27 – 30 (4 rows): 18 SC (18)

31 row: (SC, DEC) * 6 (12)

32 – 35 (4 rows): 12 SC (12)

36 row: 6 DEC (6)

We pull the remaining hole, fasten the thread,

cut off.

Sew on top of the cap pompom, decorate the cap

buttons or other decorative elements (optional).

SCARF.

First we knit with white threads.

1 row: dial 150 CH + 2 CH, with the third from the hook

we knit loops 150 DC, CH, turn (150)

Change the thread to turquoise (optional).

2 row: 2 CH, 149 DC, CH, turn (150)

Change the thread to white.

3 row: 2 CH, 149 DC (149)

We fix the thread, cut it off.

The ends of the scarf are decorated with pompons or fringe (according

desire).

We put the cap and scarf on the owlet.

CONGRATULATIONS! YOUR OWL IS READY !!!

Similar Posts