Amigurumi is an essential hobby for knitting enthusiasts and craft aficionados alike. With a crochet hook in hand, you can work wonders, from crafting a cozy blanket to creating charming toys. In this article, we will share our specially designed and freely available “Amigurumi Emotions” crochet pattern with you.
● sc – single crochet
● inc – increase
● dec – decrease
Author’s workshop on creating knitted toys “Emotions”.
The author is Anastasia Lehman.
This master class does not contain knitting lessons
crochet. MK is for personal use only.
use, cannot be applied in commercial
purposes cannot be published without the consent of
by the author.
When publishing toys related to my master
class, please indicate me as the author.
Yarn Pehorka Children’s Novelty 9 colors white 2
pcs, red, orange, blue, green, light green, purple,
– Thread floss, for embroidery eyelids and mouths;
-Hook number 2;
– Scissors, a needle.
General description for all toys!
1 row-3 air loops, in the second loop from the hook 2sc, in the third
4sc loop, on the back of the 2sc chain in one loop,
connecting column in the first loop of the row, air loop (8p);
2 row-in the first loop (where did the connecting column) do
inc (2sc in one loop), then 2sc, 2inc, 2sc
, inc, sl-st, (12p);
3 row-inc, 4sc, 2inc, 4sc, inc, sl-st, (16p);
4 row – 16 sc.
We complete our eye: cut the thread, insert into the needle, start the needle with
seamy side of the first loop
hinges, tighten. You should get a continuous pigtail along the edge.
Also complete the sole. And if our eye and sole is strong
puff, ironing them through a rag.
Eye design (eyelid):
We decorate the eyes with a thread floss, crochet number 1 we knit
the edge of the columns b / n, trying not to white part of the eye
showed through, see for yourself where to do 2sc in one loop where
three, also pierce with a hook and in the place between the columns, I have
it turned out one column. After we cut off the long thread, and
we knit with connecting columns another row to the places where
we have the legs of the columns, also a row with black thread, cut the black thread
long for embroidering cilia and eyebrows
The pupil is 6 sc in the amigurumi ring, and
we complete the loops as described earlier.
Threading with a needle
through the white part of the eye, make white
1 row- 6 sc into magic ring;
2ryad-6 inc (12p);
3,4,5 row-12 sc;
6 row – 1sc dec * 6 times
Fill the nose with filler, sew to the center of the body.
We embroider eyebrows, eyelashes, a mouth as you like 🙂
For the hands we knit 4 fingers. One finger sewn, two
knit the finger and cut the long thread (with it we will tie 3 sc),
we don’t tighten the loop, and we don’t cut the thread from the last finger.
The little finger is 6 sc into magic ring, 6 inc and we knit 6 more rows of 12sc each.
We connect three fingers to each other 3 sc, we tie everything in a circle
three fingers should get 24 sc. Next, we knit 8 rows of 24 sc.
In row 9 dec every 2 sc. 10 row-2 sc, dec, 1 sc, dec,
4sc, dec, 1sc, dec, 2 sc should get 14 loops. White
we knit another row 14 sc with a thread, cut it off and attach
color thread, we knit 10 rows, fold the handle in half and
we knit sc for both walls. Sew the fourth
For the legs we knit two soles.
1 row – 10 in the second loop from the hook, inc, 7 sc, in
the last 4 sc, on the other side of the chain 7 sc, inc, sl-st,
2 row – 2 inc, 7 sc, 4 inc, 7 sc, 2 inc,
3 row – 1 sc, inc, 11 sc, inc, 2 sc,
inc, 11 sc, inc, 1 sc, sl-st,
4 row- 3 sc, inc, repeat to the end
row, at the end of 2 sc, sl-st, (42p);
5 row- 4 sc, inc, repeat to the end
row, at the end of 2 sc, sl-st, (50p);
6 row- 5 sc, inc
end row, at the end of 2 sc, sl-st,
7ryad- 58 sc unchanged.
8 row – we knit 58 sc only for the colored part of the sole, white
part ends on row 7.
Sew both sides of the sole sc with white thread, fill
filler. On the finished foot we type 14 sc and knit 5
rows, we complete as well as fold the handle in half and
we knit sc.
The assembly of all toy bodies is the same – to put together two body parts and
together with the wrong sides inward, tie around the edge of sc
(hereinafter I call the stitching stitching of the body).
For sadness and interest, we knit two
square – 4sc into magic ring, after to EVERY
loop 3 sc mark with a marker in
each triple the second loop further
knit in a circle in every second loop
increments of 3 sc, should get 4
angle where we make the rest
we knit the stitches unchanged,
the first two rows do not take into account, we knit
another 19 rows. In the photo I have a marker
different color, beginning of row marked
I marked every second with a black thread
loop stretching a thread through it
For joy, trust, anger, disgust, knit two circles – 6 sc into magic ring, then increase 6 times, and from the next row we knit
20 rows increasing through 1 sc, next row through 2 sc
then through 3,4,5, etc., only 20 rows.
For fear, we knit two rectangles-31 into the second loop
from hook 30 sc,, next row start sc to loop from
which was tied, so we knit in 42 rows of rotary rows,
after all sides of the rectangle tie sc.
For surprise, we knit two triangles- 9 sc into magic ring, 1 sc,
increase, 3 sc in one loop every second increase loop
mark with a marker, 2 sc increase, 2 sc, increase, 3 in total
increase (three angles), then we knit 17 rows making increases into magic ring
we knit the second loop of the other three stitches of the row unchanged.
Sew legs of interest and surprise
it just doesn’t work, so we knit it
additionally by legs:
1 row – 7 sc along the edge of the pigtail legs;
2 rows-3 connecting loops, 4 sc
3 row – the first column in the loop from which
tied,, 2 more sc, sl-st;
4 row – 1 loop miss 3 sc,;
5 row – 2 sc, sl-st;
6 row – first skip 2 sc,;
7 row – 1 sc, sl-st, and tie sc along the edge. We do the left leg in
Sew legs with sc body (we also sew handles), after stitching
make 2 sl-st columns on the body turn, 3 sc, sl-st, turn; 3 sc by
leg and another sc over the body, sl-st, twist, 7 sc thread cut
hide in the body.
Spines in anger:
Each triangle is knotted in a row connecting two parts
body, separately, the thread is trimmed. Only 8 triangles. Necessary
count all stitching loops of the body stitching, divide this figure by 8, and from
subtract two more results (this is 1 loop
joining the thread, and one loop the gap between
thorn) .Approximately mark the upper center markers
a triangle so that it is at the top in the center, the number of loops
counted for the triangle earlier, they are in the center and count. number
I indicate my loops as an example (you have a different number), knitted from
other yarn. Attach the thread (it turned out after calculation 14
loops) we knit 12 sc, 1 connecting column, rotation; first
skip the connecting column of the first row, into the second loop from
hooks do 1 joint. Column, 10 sc, 2 connecting posts,
turn; also skip one loop in the next 1 sl-st, and so we knit
making a decrease at the beginning and at the end of the row, until it remains in the middle of 1 sc, cut the thread, with a needle, skip between the rows of thorns
and hide in the body. We retreat 1 loop from the spine along the stitching of the body
, we knit the next thorn, so we knit 8 pieces. After
we do not cut the knitting of the last thread, we knit it around the edge with it
Harness of joy:
A series of body stitches should produce 127 loops.
1 row – attach the thread, 1 sc 4 skip 6 sc to the 7th
loop 1 sc repeat only 16 times at the end of 2 sc;
2 row-under arch from -7sc, 1 sc between arches, repeat until
end of row at end 1 sc;
3 row – under arch 7 sc, connecting column between arches,
knit to the end of the row at the end of 1 sc.
12, into the second loop from hook 11 sc,. turn and
each row start sc into the loop from which it was tied.
In total we knit 5 rows, we knit along the edge of sc, the last side
we knit to the middle with connecting posts, cut
thread long, insert into the needle and sew our bow making
accordion, tighten, wrap the thread, fasten the thread.
We make ears for sadness, ears to sew bows to them.
Attach the thread on the top
the seam of the connection of the square body, for 9
columns from the edge (corner), (we knit in
side of the corner) 1 p connection, 1sl-st p,
7 sc,, turn, start with
this side all the rows in a loop from
which was tied, 6 sc,
connection, rotation, first loop
column, then sc at the end,
and so on until all the loops end
after the edge tie sc.
Similarly, knit the second ear.